PTFE Thrust Washers Used For Ball Valve

                              PTFE Thrust Washers

PTFE Thrust washers are designed for applications where axial space is limited, maintenance is not possible and where lubricant starvation can occur. Thrust washers are flat washers that are located between a rotating surface and a stationary component. They support the axial load or side to side motion on a shaft and prevent movement along that shaft. The thrust washer provides a surface on to which a bearing is supported.

Filled PTFE thrust washers are self-lubricating as well as maintenance-free and provide a long service life due to low friction. Despite of their compact design, these washers can accommodate heavy axial loads and are suitable for relatively slow rotational or oscillating movements. They also have good dimensional stability and thermal conductivity.

HONGDA is the professional valve soft seals materials in China, Depending on the application requirements, our valve sealing materials are available for PTFE, filled PTFE, TFM, PEEK, carbon PEEK, PCTFE, Spring Energized Seals.

PTFE Thrust washers are designed for applications where axial space is limited, maintenance is not possible and where lubricant starvation can occur.